Mitsubishi Electric AE-200A Instruction Book page 15

Item
Floor selection
Area selection
Group name
Room temperature
Room humidity
Weekly schedule number
Number of units whose filter
sign is turned on *1
Number of units in error
Deselect-all
Select-all-groups-on-the-floor
Select-all-groups
Zoom-out
Zoom-in
*1 The item will not appear if the number of units is "0."
WT07992X02
Select a floor you want to monitor.
Select an area of the selected floor you want to monitor.
The name of the group will appear.
Indoor unit return air temperature will appear.
Note: The temperature shown may be different from the actual room temperature.
Note: The temperature shown may be higher than the actual temperature especially when the
unit is stopped during the Heat mode.
Note: Whether to show or hide the room temperature can be set on the [Unit Info.] screen.
Note: For Air To Water (PWFY) unit groups, the current water temperature will appear.
Note: The temperature unit °C or °F will appear, depending on the temperature unit that has
been selected on the [Unit Info.] screen.
The room humidity will appear.
The weekly schedule number that is currently effective will appear.
The number of units whose filter sign is currently turned on will appear. Touching "
bring up the [Filter Sign] screen. (See section 3-4-2 "Filter Sign List".)
The number of units that are currently in error will appear. Touching "
*1
[Malfunction] screen. (See section 3-4-1 "Malfunction List".)
Note: AE-200/EW-50 errors will not appear on the AE-50's LCD.
Touch to cancel all group selections.
Touch to select all groups on the currently selected floor.
Touch to select all groups.
Touch to display the status of the whole floor.
Touch to go to the zoomed-in screen.
Description
15
" will
" will bring up the