Mitsubishi Electric AE-200A Instruction Book page 19

[5] [HWHP] display
Touch [Monitor/Operation] in the menu bar, and then touch [HWHP].
The operation status of each HWHP (CAHV, CRHV) unit group will appear.
Note: The [Controller] setting will appear (only on the AE-200's LCD) when the [System Exp] setting on the [Unit Info.] screen is set
to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to display the information for each
AE-200, AE-50, and EW-50 individually.
Note: Fan mode will appear for CAHV units.
Note: Brine temperature will appear for CRHV units.
Controller
Select [AE] to display the
information for AE-200, and
select [1], [2], [3], or [4] to
display the information for
each AE-50/EW-50.
Operation mode
Group icons
The icon indicates the
operation condition of the
group.
Group name
Set water temperature
Deselect-all
Select-all-groups
WT07992X02
19
Representative water
temperature
Outdoor temperature
Brine temperature
Inlet water temperature
Fan mode
Outlet water temperature
Operate
Touch to display the
operation settings screen of
the selected group.