Mitsubishi Electric AE-200A Instruction Book page 79

Item
■ File name
(PI controller (PAC-YG60MCA) - without connection to an AE-50/EW-50 controller)
"ChargeParameter"_[yyyy]-[mm]-[dd]"MCPA"[PI controller address]-[Time period (1–5)].csv
(Built-in Pulse Input (PI) - without connection to an AE-50/EW-50 controller)
"ChargeParameter"_[yyyy]-[mm]-[dd]"MCP"-[Time period (1–5)].csv
(PI controller (PAC-YG60MCA) - with connection to one or more AE-50/EW-50 controllers)
"ChargeParameter"_[yyyy]-[mm]-[dd]"MCPA"[AE-50/EW-50 No. (1–4)
period (1–5)].csv
(Built-in Pulse Input (PI) - with connection to one or more AE-50/EW-50 controllers)
"ChargeParameter"_[yyyy]-[mm]-[dd]"MCP"[AE-50/EW-50 No. (1–4)
Metering device
data
*1 AE-50/EW-50 No. will not be shown for the AE-200 data.
■ File output destination
(without connection to an AE-50/EW-50 controller)
[Root folder of the USB memory]\[Serial No.]\"OperationalData"\"ChargeParameters"\"AE"\[Date]
(with connection to one or more AE-50/EW-50 controllers)
[Root folder of the USB memory]\[Serial No.]\"OperationalData"\"ChargeParameters"\"AE"[AE-50/EW-50
No. (1–4)
*1 AE-50/EW-50 No. will not be shown for the AE-200 data.
WT07992X02
Example: ChargeParameter_2015-03-01MCPA50-1.csv
Example: ChargeParameter_2015-03-01MCP-1.csv
Example: ChargeParameter_2015-03-01MCPA1-50-1.csv
Example: ChargeParameter_2015-03-01MCP1-1.csv
Note: Time periods 1 through 5 can only be set from TG-2000A or Initial Setting Tool. When shipped from
the factory, only Time period 1 is settable.
*1
]\[Date]
Note: The AE-50/EW-50 data can be output from the AE-200.
Note: Only one AE-50's data can be output from the AE-50.
Description
79
*1
]-[PI controller address]-[Time
*1 ]-[Time period (1–5)].csv