Maintenance; Backing Up Settings Data; Importing Settings Data; Csv Output - Mitsubishi Electric AE-200A Instruction Book

Function
ON/OFF/Blink (LED on the
controller)
Operation status of each group
Filter sign
Prohibition of local remote
controller operation
Measurement List
AHC List
Malfunction List
Malfunction Log
Monitor
External output
Energy Use Status
Ranking
Target Value Setting
Peakcut Control Status
Energy data output

Backing up settings data

Importing settings data

Energy data output

Maintenance

CSV output

Touch Panel Calibration

Group setting information/
Interlocked LOSSNAY
information
Malfunction log
Data back-up
Scheduled operations
Current date and time
Screen lock function
Touch panel cleaning
Maintenance
Time synchronization
WT07992X02
ON: One or more units are in operation.
OFF: All units are stopped.
Blink: One or more units are in error.
The operation status of each group can be displayed.
The filter sign indicates that the filter is due for cleaning.
The icon to indicate that the operation is prohibited by the
AE-200/AE-50 can be displayed.
The readings of the temperature sensor, humidity sensor, and
metering device can be displayed.
The input and output status of Advanced HVAC CONTROLLERs
can be displayed.
The address of the unit in error and the error code can be displayed.
Up to the latest 128 errors can be displayed for each
AE-200/AE-50/EW-50.
The ON/OFF and Error signals can be output to an external device.
(An external input/output adapter is required.)
The energy consumption data and comparison data can be
displayed in a graph, and be output in a CSV format to a USB
memory device.
The rankings in electric energy consumption and the fan operation
time of given indoor units can be displayed in a bar graph, and be
output in a CSV format to a USB memory device.
The target electric energy consumption values for the entire system
can be set.
The Peakcut control status can be checked, and be output in a CSV
format to a USB memory device.
Energy management data can be displayed, and be output in a CSV
format to a USB memory device.
The settings data can be stored to a USB memory device.
Backed-up settings data can be restored from a USB memory
device.
Energy management data can be output in a CSV format to a USB
memory device.
The operation data, such as apportioning parameters and metering
device data, can be output to a USB memory device. (Each file
contains the data of up to 62 days (or 4 days when the data type is
30-minute intervals).)
The touch panel can be calibrated.
The group setting information and interlocked LOSSNAY information
are retained in the hardware, even if power is turned off.
The malfunction log is retained in the hardware, even if power is
turned off.
The scheduled operations set for each group are retained in the
hardware, even if power is turned off.
The current date and time are retained by the built-in capacitor when
power is turned off.
The touch panel operation can be locked.
The touch panel can be locked when it needs to be cleaned.
Clocks on the controllers and the units that are under the control of
the main system controller are synchronized once a day.
10
Description