Target Value - Mitsubishi Electric AE-200A Instruction Book

3-2-3. Target value

This section explains how to set the target electric energy consumption values for the entire system for the current
year, each month, each day of the week, and each block. The set values will be displayed in the graph on the [Energy
Use Status] screen (see section 3-2-1) and the [Ranking] screen (see section 3-2-2).
Touch [Energy Mgmt] in the menu bar, and then touch [Target value].
Set the annual target electric energy, usage ratio for each month, and usage ratio for each day of the week to
automatically calculate the monthly target electric energy. Also set the usage ratio for each block to automatically
calculate the annual target electric energy for each block.
Note: The [Controller] setting will appear (only on the AE-200's LCD) when the [System Exp] setting on the [Unit Info.] screen is set
to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to make settings for each AE-200,
AE-50, and EW-50 individually.
Important
● The target value settings must be made after all units have been started up. If the settings are made while one or more
units are starting up, the calculation result will be inaccurate. The settings that have been saved while one or more units
are starting up may be lost.
Controller
Select [AE] to make
settings for AE-200, and
select [1], [2], [3], or [4]
to make settings for each
AE-50/EW-50.
Annual target electric
energy
Comparison with previous
year
Monthly target electric
energy
Usage ratio for each
month
Edit
Touch to set [Annual target],
[Monthly target], and [Usage
ratio].
Usage ratio for each day
of the week
WT07992X02
41
Block name
Usage ratio for each block
Annual target electric
energy for each block
Edit
Touch to set the [Usage
ratio] for each block.
Save Settings
Touch to save the changes
made.