Mitsubishi Electric AE-200A Instruction Book page 38

Air conditioning control system centralized controller
Hide thumbs Also See for AE-200A:
Table of Contents

Advertisement

Item
Date
Gridline
Display item
Target value
% against target values
(2) Touch [OK] to go back to the previous screen.
The graph will be created based on the specified criteria.
Note: No graph will appear if no data that meet the specified criteria exist.
Item
Graph region
(3) To export the displayed ranking data in the CSV format, remove the controller cover and insert a USB memory
device to the USB port.
Touch [CSV output] with the ranking data to be output being displayed.
WT07992X02
Specify a date to display the data in the ranking graph.
Date range
Data storage period
[Day]
The last 24 months
[Month]
The last 24 months
[Year]
The last 5 years
Note: Only the data for the period during which the AE-200/AE-50/EW-50 was powered on will
appear in the graph. The data for the period during which the AE-200/AE-50/EW-50 was
powered off will not appear in the graph.
Select [Show] to show the gridline in the ranking graph, and [Hide] not to.
Select an item to display its data in the ranking graph.
Note: The selectable items vary, depending on the item selected in the [Display range] field.
Display item
Electric Energy (kWh)
Fan operation time (min)
Thermo-ON time (Total) (min)
Thermo-ON time (Cool) (min)
Thermo-ON time (Heat) (min)
A red triangle mark will appear to indicate a target value.
Note: Target value will appear only when [Block] or [EM block] is selected in the [Display range]
field and [Electric Energy] is selected in the [Display item] field.
Note: Target value will not appear when the target value is not set or set to "0".
Select [Show] to show the percentage of the current cumulative value against the target
values, and [Hide] not to. When the current cumulative value exceeds the target value, the
percentage will be greater than 100.
Ranking graph will appear in descending order of the value of the selected display item.
Cumulative value
(Yellow)
Note: "Cumulative value (value exceeded the target value)" will appear when [Electric Energy]
is selected in the [Display item] field.
Description
Display items
Address
Group
V
V
V
V
V
V
V
V
V
V
Description
Cumulative value
(value exceeded the target value)
(Orange)
38
Display range
Block
EM block
V
-
-
-
-
V: Item that can be displayed in the graph
Target value
(Gray frame + red triangle)
V
-
-
-
-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae-50aAe-200eAe-50e

Table of Contents