Energy Management; Energy Use Status - Mitsubishi Electric AE-200A Instruction Book

3-2. Energy Management

The energy-control-related status, such as electric energy consumption, operation time, and outdoor temperature,
can be displayed in a graph. Also, preset target value of the electric energy consumption can be checked.
Note: Energy use status data and ranking data can be output in a CSV format.
Note: File names, as well as date formats, delimiter characters, and temperature units (°C, °F) within the files output as CSV will
use formats set as initial settings. Refer to the Instruction Book (Initial Settings) for settings methods.

3-2-1. Energy Use Status

On the [Energy Use Status] screen, the energy-control-related status, such as electric energy consumption,
operation time, and outdoor temperature, can be displayed in a graph.
Operators can check the detailed status of given indoor units by specifying the date to display the data per group,
block, EM block, or unit address. Also, the status of other indoor units can be displayed at the same time for
comparison.
Displaying energy-control-related status of each hour, day, and month in a graph visualizes the energy-saving
status.
Touch [Energy Mgmt] in the menu bar, and then touch [Energy Use Status].
Important: The following settings are required beforehand to display a graph.
• Energy Management (Refer to the Instruction Book (Initial Settings) for details.) (This setting is not required
when using an AE-200 apportioned electricity billing function.)
• Measurement (Refer to the Instruction Book (Initial Settings) for details.)
Note: A separate license is required, depending on the selected date range, display range, and display item.
Note: In case the AE-200/AE-50/EW-50 malfunctions, it is recommended to periodically save the file in the CSV format by touching
[CSV output] on this screen or by touching [Output as CSV file] on the CSV output screen (see section 5-3 "CSV output").
Display target
Comparison target
CSV output
WT07992X02
29
Date to display the data
Comparison date
Display switching
Graph region
Update