Other Errors - ALLIANCE Speed Queen Programming

Machine Errors

Other Errors

There are a few errors that do not sound an audio tone or change
the display. These errors are counted in the audit counters.
Two Drive Communication Statuses, "I2T Overcurrent detected
when set" and "Overcurrent shunt detected when set", will cause
the motor to stop spinning if set. The front end control will stop
the motor if this error is set. The control will wait until the error
is cleared and the motor is stopped before sending a new speed
set point.
©
Copyright, Alliance Laundry Systems LLC - 78 Part No. 806526ENR2
DO NOT COPY or TRANSMIT