ALLIANCE Speed Queen Programming page 36

Globals Menu
Display
NUMBER OF COINS
DENOMINATION VALUES
COIN #1
COIN #2
COIN #3
COIN #4
COIN #1 VALUE
COIN #2 VALUE
START PULSE VALUE
START PULSE MODE
PROG OUTPUT TYPE #1-3
DEFAULT CYCLE
CARD READER DISP CONTROL
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Global Menu List Options
Description
1 = 1 Coin
2 = 2 Coins
3 = 3 Coins
4 = 4 Coins
5 = 5 Coins
Set the denomination of each type of coin.
0 - 65535*
0 - 65535*
0 - 65535*
0 - 65535*
1 - 65535
1 - 65535
1 - 65535
0 = Off, Single Pulse
128 = On, Single Pulse
192 = On, Multiple Pulses
Program when the control provides an out-
put that can be used for variety of reasons.
Set what cycle appears on the display by
default.
1 = Normal/Hot
2 = Normal/Warm
3 = Normal/Cold
4 = Perm Press/Hot
5 = Perm Press/Warm
6 = Perm Press/Cold
7 = Delicate/Hot
8 = Delicate /Warm
9 = Delicate/Cold
0 = Front-End Control controls the dis-
play
1 = Card Reader controls the display
Table 15 continues...
36
Default
4
*Value zero with visible coin will show
'T' for Token.
25
50
100
200
25
100
25
128 = On, Single Pulse
Off ( Ready Mode only)
3 = Normal/Cold
0 = Front-End Control controls the display
Part No. 806526ENR2