ALLIANCE Speed Queen Programming page 42

Globals Menu
Display
BACK
MESSAGE #1
MESSAGE #2
PROG CYCLE TIME DISP
NO CYCLE TIME DISPLAY
BACK
RUN
READY
TIME CYCLE COMPLETED DISP
LIMIT CYCLE TEMP SELECT EN
NUM OF BALANCE ATTEMPTS
CYCLE PAUSE RESUME
LOW POW/SHUTDOWN 1-4 EN
POWER FAIL RESET
IR ACCESS
MANUAL RAPID ADVANCE
MANUAL DIAGNOSTICS
FACTORY TEST CYCLE
LUCKY CYCLE
BACK
DAY(S) OF WEEK ENABLE
NUMBER OF CYCLES
DISPLAY OPTION
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Global Menu List Options
Description
Return to higher menu.
10 characters maximum
10 characters maximum
If enabled, the programmed time is dis-
played during a cycle. If disabled, normal
remaining cycle time is displayed.
This option can change whether the cycle
time is shown on the display or not.
Return to higher menu.
If enabled, no remaining time is displayed
when running a cycle. "--" is displayed in-
stead. If disabled, normal remaining cycle
time will display when running a cycle.
If enabled, no time is displayed when not
running a cycle. If disabled, normal cycle
time is displayed when not running a cy-
cle.
ENABLE/DISABLE
If enabled, cycle temperature selection will
be restricted to Cold only.
1 - 7
ENABLE/DISABLE
ENABLE/DISABLE
This sets the power outage duration from
0-120 minutes before resetting.
ENABLE/DISABLE
ENABLE/DISABLE
ENABLE/DISABLE
ENABLE/DISABLE
Set parameters for the Lucky Cycle.
Select to return to higher menu.
0 - 255 (refer to How to Read the Days En-
able Value Table)
0 - 255
ENABLE/DISABLE
Table 15 continues...
42
Default
-
CUSTOM #1
CUSTOM #2
DISABLE
-
-
DISABLE (cycle time will be displayed)
DISABLE (cycle time will be displayed)
ENABLE
DISABLE
7
DISABLE
DISABLE
10
ENABLE
ENABLE
ENABLE
ENABLE
-
-
0 (option disabled)
0
DISABLE
Part No. 806526ENR2