Sensors; Figure 10. Signal Processor Lock Replacement - Nonin CO-Pilot H500 Operator's Manual

System Components and Set Up
2. Gently spread the lock hinge so it fits over the end of the signal
processor.
3. Click the lock into place (Figure 10.B).
A
B

Figure 10. Signal Processor Lock Replacement

Sensors

Detailed information regarding specific sensor use (e.g., patient population,
body/tissue, application, connecting the sensor to the system) can be found in
the respective sensor instructions for use.
For a list of compatible sensors, refer to the "Parts and Accessories" section on
page 39.
23