Table 3. Co-Pilot Measurement Screen Symbols And Indicators - Nonin CO-Pilot H500 Operator's Manual

Display Screens and Symbols

Table 3. CO-Pilot Measurement Screen Symbols and Indicators

No. Symbol
1
%SpO
2
2
3
%COHb
4
rSO
5
2
Display Battery Indicator
The display battery indicator shows the approximate
percentage of battery life remaining on the display. For
signal processor battery information see item number 11.
Approximate Battery Percentage
Charging
Critical Battery
Percent Functional Hemoglobin Oxygen Saturation
Displays dashes until the reading is valid.
%SpO data displays from 0 to 100% when a signal
2
processor receives an adequate signal from an attached
sensor.
Pulse Rate
Displays dashes until the reading is valid.
Pulse Rate data displays from 18 to 321 BPM when a signal
processor receives an adequate signal from an attached
sensor.
The symbol will change color based on the pulse signal
quality, see "Determining Pulse Signal Quality" section on
page 25.
Percent Carboxyhemoglobin
Displays dashes until the reading is valid.
%COHb data displays from 0 to 99% when a signal
processor receives an adequate signal from an attached
sensor.
Cerebral and Tissue Hemoglobin Oxygen Saturation
NOTE: %rSO
displays when an absolute cerebral and
2
tissue sensor is attached to a signal processor.
%rSO2 displays from 0 to 100% when a signal processor
receives an adequate signal from an attached cerebral and
tissue sensor.
Description
15