System Components And Set Up; Unpacking; Figure 5. Unpacking The Co-Pilot System - Nonin CO-Pilot H500 Operator's Manual

System Components and Set Up

NOTES:
• Before using the system, please review all warnings and cautions.
• Before using the system for the first time, the battery should be charged
fully.
• Additional, but recommended, set-up tasks include: setting the clock.

Unpacking

Carefully remove the system components and accessories from the shipping
carton. Inspect all components for damage. Compare the packing list with the
accessories received to make sure the shipment is complete.
The standard system configuration includes these non-sterile components:
• D-HH, Nonin CO-Pilot handheld display
• SP-BLE, Nonin CO-Pilot Signal Processor, Bluetooth Low Energy
• H500-CC, Nonin CO-Pilot System Carrying Case
• H500-PS, Nonin CO-Pilot Power Supply (quantity 2).
• Sensmart® 8330AA Multi-Sensing Sensor
• USB Flash Drive
• Data Download Cable
• Operator's
For a list of accessories, see "Parts and Accessories" section on page 39.

Figure 5. Unpacking the CO-Pilot System

18
System Components and Set Up