System Components and Set Up
Signal Processor (SP-BLE)
The signal processor calculates all measurements and sends to paired display
through a Bluetooth Low Energy (BLE) wireless connection.
Signal processor requires a sensor to be connected to the sensor connection
port to take a measurement. See "Connect/Disconnect a Sensor to the Signal
Processor" section on page 22 for sensor connection instructions.
No.
Symbol
1
2
NA
3
4
NA
5
4
Figure 8. SP-BLE Signal Processor
Table 5. SP-BLE Features
On/Off Button
• On – Press and hold power button.
• Off (Long-Term Storage Mode) – For information on
putting signal processor into long-term storage mode,
see "Placing Device in Long-Term Storage Mode"
section on page 28.
Signal Processor Charging Port
Bluetooth Indicator
Bluetooth indicator LED flashes blue when signal processor is
ready for a connection to display and solid blue when a
connection has been made.
Sensor Connection Port
Signal Processor Battery Indicator
Shows the current battery status of the signal processor. For
more information on signal processor battery, see "Charging
the System" section on page 27.
3
5
1
Description
2
21