E81: Program selector / Encoder fault
E81
Main Board, wiring, Encoder and cycle selector/software faulty.
Checks to perform:
Check whether the Wiring for the Selector Knobs is
properly connected?
Replace selector and modifier switches and repeat the
Diagnostic Cycle to check for any further alarms. Does
the same Error Code still appear?
E82: Key stuck
E82
Key Stuck error, wiring, cycle selector switch, main board and software defect.
Checks to perform:
Remove the selector and knob and restart the dryer.
Does the problem exist?
Check whether the Wiring for Selector and Knob are
connected properly?
Replace the Electronic Control Board and repeat the
Diagnostic Cycle to check for any further alarms.
Y
E
S
Y
E
S
Y
E
S
WARNING
Check that all the connectors are correctly inserted
Correct the Wiring and repeat the Diagnostic Cycle to
NO
check for any further alarms.
Replace the Electronic Control Board and check for any
YES
WARNING
Check that all the connectors are correctly inserted
Replace the selector and knob, and check for any
NO
Correct the Wiring and repeat the Diagnostic Cycle to
NO
check for any further alarms.
134
E81
further alarms.
E82
further alarms.