E31: Pressure Sensor Fault - Frigidaire FFLE3911QW Technical & Service Manual

Table of Contents

Advertisement

E31: Pressure sensor fault

E31
Pressure sensor defective, wiring or Main Control Board defective.
Checks to perform:
Is the air tube connected properly (check also for kinking
and leaking)? (Disconnect the tubes and blow into them to
make sure the system is unobstructed) (See Fig. 1)
Is the frequency of Pressure Sensor between 45 Hz to 45.5
Hz? (Measure it on the pressure sensor wiring connector at
Main Control Board when machine is powered with empty
tub (No water)) (See Fig.2)
Replace the Main Control Board and repeat the Diagnostic
Cycle to check for any further alarms.
Y
E
S
Y
E
S
WARNING
Check that all the connectors are correctly inserted
Replace or Repair the air tube and repeat the Diagnostic
NO
Cycle to check for any further alarms.
Replace Pressure Sensor and repeat the Diagnostic
NO
Cycle to check for any further alarms.
165
E31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fflg3911qwFfle4033qwFflg4033qw

Table of Contents