Enabling A Specific Test Pattern Color; Selecting An Engine Test Pattern; Viewing 4K40-Rgb Status; Running The 4K40-Rgb Interrogator - Christie 4K40-RGB User Manual

Hide thumbs Also See for 4K40-RGB:
Table of Contents

Advertisement

Enabling a specific test pattern color

You can enable a specific test pattern color to eliminate one or more colors to help with certain
diagnostics and setups, such as overlaying one image on top of another from stacked projectors.
1. From the side panel home page, use the arrows to select Test Pattern.
You can also select the test patterns from MENU > Test Pattern.
2. Select the Flat White test pattern.
3. To confirm your selection, select Enter.
4. On the IR remote keypad, press Func+6+<0 to 7>.
Where <0 to 7> represents a specific color.

Selecting an engine test pattern

Several engine test patterns are available to assist with the calibration and internal optical alignments
of the projector and to diagnose any issues that may occur.
1. Select MENU > Admin > Service.
2. Enter the service password.
3. Select Engine Test Patterns.
4. Scroll through the list of test patterns.
5. Select the required test pattern.
6. To confirm your selection, select Enter.
7. To disable the engine test patterns, select MENU > Admin > Service > Engine Test
Patterns > Off.

Viewing 4K40-RGB status

Alarms contain information about the values of the items operating in normal range, warnings, and
errors that can be reported by the status system of 4K40-RGB.
1. From the display panel, select Status.
You can also view the statuses from MENU > STATUS.
2. Scroll to the status category you want to view and select it.

Running the 4K40-RGB interrogator

The interrogator captures diagnostic information Christie personnel uses to help diagnose and correct
any issues.
1. Insert a USB flash drive in the USB port on 4K40-RGB.
The USB flash drive must be formatted using the FAT 32 file system.
2. From the display panel, select MENU > Admin > Interrogator.
3. Select Run.
The interrogator file is stored at the root directory on the USB flash drive.
4. At the completion prompt, select OK.
4K40-RGB User Guide–D4K40-RGB, Roadie 4K40-RGB
020-102958-05 Rev. 1 (04-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Diagnostic tools
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roadie 4k40-rgb

Table of Contents