Table of Contents
Advertisement
6.3 HDD Option
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components,
minimize the amount of time the access panel is open.
1.
Check the status of the hard disk drive through the LED on the drive tray.
2.
Back up all data on the hard disk drive.
3.
Remove the hot-plug hard disk drive.
Step 1: Press the drive panel button. The lever on drive tray pops up automatically.
Step 2: Hold the lever and pull it outwards to remove the drive tray.
Hardware Options Installation
23
Advertisement
Table of Contents
Troubleshooting
