Port 60/64 Emulation
USB transfer time-out
Device reset time-out
Device power-up delay
8.3.2.14 CSM Configuration
This option is used to set the compatibility support module to support various VGA, boot
devices, and other devices for better compatibility.
This should be enabled for the complete USB keyboard
legacy support for non-USB aware OS. Options include:
Disabled
Enabled
The time-out value for Control, Bulk, and Interrupt
transfers. Options include:
1 sec
5 sec
10 sec
20 sec
USB mass storage device Start Unit command time-out.
Options include:
10 sec
20 sec
30 sec
40 sec
Maximum time the device will take before it properly
reports itself to the Host Controller.
Options include:
Auto
Manual
BIOS Setup
Enabled
20 sec
20 sec
Auto
65