Inspur NF3120M5 User Manual page 79

Interface Parameters
Memory Power and Thermal
Throttling
DDR PowerDown and idle counter
For LPDDR Only: DDR PowerDown
and idle counter
REFRESH_2X_MODE
LPDDR Thermal Sensor
SelfRefresh IdleTimer
Throttler CKEMin Defeature
Throttler CKEMin Timer
Memory Thermal Management
Function Description
Memory power and thermal throttling settings
BIOS or PCODE controls the DDR-CKE mode and the
idle counter. Options include:
PCODE
BIOS
Only used for LPDDR or PCODE to control the DDR-CKE
mode and the idle counter. Options include:
PCODE
BIOS
iMC enables 2x self-refresh of memory during WARM
and HOT. Options include:
Disabled
1- Enabled for WARM or HOT
2- Enabled HOT only
When enabled, MC uses MR4 to read the LPDDR
thermal sensor. Options include:
Enabled
Disabled
Memory self-refresh interval, ranging from 512 to
65535.
Memory throttler CKEMin defeature. Options include:
Enabled
Disabled
Memory CKEMin interval, ranging from 0 to 255.
Memory thermal management. Options include:
Enabled
Disabled
BIOS Setup
Default Value
----
BIOS
BIOS
Disabled
Enabled
512
Disabled
48
Disabled
73