Image Mosaic - NovaStar NovaPro UHD Jr User Manual

NovaPro UHD Jr All-in-One Controller
User Manual
Figure 5-17 Dual link mode
Step 3 In single link mode, the resolutions of DVI 1, 2, 3 and 4 are adjusted together. In dual
link mode, the resolutions of DVI 1 and 3 are adjusted together. For resolution
adjustment, please refer to
Step 4 Rotate the knob to select DVI Mosaic and press the knob to enter the DVI mosaic
settings menu.
Menu
Layout
Width
Height
Apply
Note:
Only one interlaced SDI input is supported in DVI mosaic mode of four connectors.

5.5 Image Mosaic

When the pixel count of the LED screen is larger than the loading capacity of a single
NovaPro UHD Jr unit, the image mosaic function is required. The total loading
capacity of all cascaded NovaPro UHD Jr units equals to the total pixel count of the
LED screen.
www.novastar.tech
5.4.2 Setting Input Source
Description
Set the mosaic layout for 4 DVI connectors.
 Single link mode supports 7 layouts:
, and .
Dual link mode supports 2 layouts:

Adjust the width of the individual mosaic area.
 Single link: The default width is 1920 and the range is 64–
2048.
 Dual link: The default width is 3840 and the range is 64–
4096.
Adjust the height of the individual mosaic area.
Single link: The default width is 1080 and the range is 64–

1200.
Dual link: The default width is 1080and the range is 64–

2160.
Make the settings take effect.
5 Menu Operations
Resolution.
, ,
and .
, ,
21