Calibrating The Touchscreen - adept technology T2 User Manual

5.2

Calibrating the Touchscreen

This section describes the process for calibrating the T2 pendant touchscreen.
1. From the main menu, press SYS MENU to display the system menu.
2. Select Touchscreen Calibration. The touchscreen calibration window opens.
Figure 5-1. Touchscreen Calibration Window
NOTE: Once the calibration process is started, it cannot be canceled.
3. Use the T2 pendant stylus (see
process, as instructed on the screen.
4. When the calibration process is completed, tap the screen one time to exit and
return to the system menu.
5. Press OK to exit the system menu and return to the main menu.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 1-3 on page
Adept T2 Pendant User's Guide, Rev D
Calibrating the Touchscreen
9) to perform the calibration
43