Table of Contents
Advertisement
Manual Title
Instructions for Adept
Utility Programs
V+ Operating System User's
Guide
V+ Language User's Guide
Adept Document Library
The Adept Document Library (ADL) contains documentation for Adept products. You
can access the ADL as follows:
• Select Support > Document Library from the menu bar on the Adept website
Home page.
• Type the following URL into your web browser:
http://www.adept.com/Main/KE/DATA/adept_search.htm
The ADL is also included on any software disk that ships with an Adept robot.
To locate information on a specific topic, use the Document Library search engine on the
ADL main page. To view a list of available product documentation, use the menu links
located above the search field.
1.8
Programming the T2 Pendant
Many of the features of the pendant are accessible to V+ programs. For example, a
program can receive button-press input, read the setting of the Speed Bar, turn LEDs on
and off, and display text to the Pendant Display Window (see
a comprehensive overview of these functions, refer to the
The T2 pendant sends the setting of the Speed Bar when one of the following buttons is
pressed: YES/+, NO/-, or one of the +/- Joint/Axis buttons at the right-hand side of the
pendant. (The MCP4 pendant sends the speed whenever the Speed Pot is pressed.) In
addition, the T2 pendant sends the setting of the Speed Bar if it is pressed along with the
STEP button. In that case, the T2 pendant continues sending the Speed Bar value even
after STEP button is released, until the Speed Bar is released.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 1-2. Related Manuals (Continued)
Describes the utility programs used for advanced system
configurations, system upgrades, file copying, and other
system configuration procedures.
+
Describes the V
operating system, including disk file
operations, monitor commands, and monitor command
programs.
+
Describes the V
language and programming of an Adept
control system.
CAUTION:
The behavior described below explains the
differences between programming the T2 pendant and the
Adept MCP4 pendant.
Adept T2 Pendant User's Guide, Rev D
Programming the T2 Pendant
Description
Figure 4-1 on page
V+ Language User's
21). For
Guide.
11
Advertisement
Table of Contents
