adept technology T2 User Manual page 43

Maintenance
Installing the USB Memory Stick
1. Open the protective cover:
3. Insert the USB memory stick into the
USB connector:
NOTE: The USB memory stick will be detected and shown as a hard disk.
Removing the USB Memory Stick
1. Pull the USB memory stick from the
USB connector:
42
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2. When the protective cover is open, you
can see the USB connector:
4. Here is the USB memory stick installed
in the pendant:
2. Push down on the protective cover until
it is fully seated:
Adept T2 Pendant User's Guide, Rev D