Table of Contents
Advertisement
•
•
•
•
•
MAINTENANCE
SECTION 8
Page31
BREATHER (illust. 39)
TRANSMISSION AND TORQUE CONVERTER
1. Remove the transmission and torque converter system
breather (1).
2. Remove the screw (2) from the top of the breather. Take
the cap off and remove the element.
3. Wash the housing and cap with cleaning solvent and dry
thoroughly with compressedair.
4. Clean the element with compressedair from the inside. If
the element is beyond cleaning, replace the complete
breather assembly.
5. Install the element on the housing and place the cap over
it. Securethe cap with the screw (2).
6. Install the breather in place on the breather tube.
lIIust. 39
Transmissionand Torque Converter
System Breather.
Advertisement
Table of Contents
