International H-400C Operator's Manual page 25

Pay loader
Table of Contents

Advertisement

SECTION 4
PREPARING
FOR
EACH
DAY'S
WORK
Page
2
4. Open the air reservoir drain valves (1 and 2, Illust. 4).
Drain any accumulated moisture, then close the valves.The
valves are located on the left in the center hinge area below
the steering cylinder.
NOTE: It is especially important that the air tanks are
thoroughly drained of water in cold weather.
5. Perform each of the 1Q-hour lubrication requirements
shown on the "SERVICE GUIDES" in Section
7.
lIIust.4
Air ReservoirDrains.
u
lIIust. 5
General Inspection.
LOOK FOR OIL AND AIR LEAKS AND DETERMINE
THEIR SOURCE SO THAT THEY CAN BE CORRECTED.
CHECK HEADLIGHTS FOR OPERATION. ALSO CHECK
TAILLIGHT AND STOPLIGHT.
CLEAN ALL GLASS (WINDOWS, WINDSHIELD INSTRU-
MENTS AND SIDE VIEW MIRROR [IF SO EQUIPPED]).
CHECK TI RES FOR CUTS, TREAD WEAR, PROPER
INFLATION.

Advertisement

Table of Contents
loading

Related Products for International H-400C

Table of Contents