Table of Contents
Advertisement
PREPARING
FOR
EACH
DAY'S
WORK
•
Page 1
1. Check level of coolant in radiator. Look at the sight gauge
in the top tank of the radiator. The ball in the gauge should
be floating. If the ball is not floating, remove the radiator cap
and add coolant until the level is up to the bottom of the
filler neck.
•
•
lIIust. 1
Radiator Sight Gauge.
•
2. Be sure the fuel tank (Illust. 2) is full. Fill the tank at the
end of each day's operation
to reduce condensation
of
moisture.
3. Check the air cleaner service indicators (illust. 3) to see if
the air cleaner filters are restricted. If so indicated, service the
air cleaner filters before operating the machine.
•
SECTION 4
lIIust. 2
Fuel Tank Filler Cap.
lIIust. 3
Air Cleaner Service Indicator .
Advertisement
Table of Contents
