Table of Contents
Advertisement
INSTRUMENTS
AND
CONTROLS
SECTION 3
•
Page
6
The number of the control (17 through 27) corresponds with the numbers shown on Illust.
5,
unless
otherwise indicated.
•
•
lIIust.5
Controls.
17. TransmissionGear RangeLever.
18. Transmission Direction Lever.
19. Parking Brake Knob.
20. Hand Throttle Control.
21. Window Wiper Control.
22. Bucket Control Lever.
23. Boom Control Lever.
24. Accelerator Pedal.
25. Brake Pedal.
26. Brake and Transmission
Disconnect Pedal.
27. Air Horn Button.
•
®
TransmissionGear RangeLever
®
Parking Brake Knob
This lever is used to select anyone of the transmission gear
ranges.For additional information, refer to "DRIVING THE
MACHINE" in Section 5.
The parking brake is to be usedonly for parking the machine.
Pushthe knob in to apply the brake. Pull it out to releasethe
brake.
®
Transmission Direction Lever
This lever is usedto select machine direction. For additional
information refer to "DRIVING THE MACHINE" in Section
5.
The machine air pressure must be built up to 85 psi before
the parking brake can be fully released. The parking brake
warning light on the instrument panel will be flashing and a
warning buzzer will sound intermittently while the parking
brake is engaged.
•
NOTE: Do not drive with the parking brake applied.
Advertisement
Table of Contents
