Table of Contents
Advertisement
•
•
•
•
•
SCHEDULED
MAINTENANCE
SECTION 7
Page13
Item 17· Fuel Level (lliust. 8)
SERVICE POINTS
Fill the fuel tank at the end of each work shift to keep
moisture condensation to a minimum. Refer to Cummins
Engine Operator's Manual for type of fuel specified.
lIIust. 8
Fuel Fill.
Item 18 • Rear Axle Cradle Pivots (lliust. 9)
(Two fittings) . Apply the lubricator to each fitting located
below the cradle pivot pins in a hole in the cradle until clean
lubricant appears.
lIIust 9
Axle Cradle Lubrication Fitting.
Item 19· Steering Linkage
(Four fittings)- Lubricate the three fittings in the drag link
ball socket ends and the fitting in the eye bolt going into the
hydraulic steering valve. Apply the lubricator to eachfitting
until clean lubricant appears.
Item 20· Batteries
Check the
fluid
level of
the
batteries.
Refer to
"ELECTRICAL SYSTEM" in Section 8.
Advertisement
Table of Contents
