LG T7WM3P5MINI Owner's Manual page 15

2
Remove the guide plate if the tap is too
large to fit the adapter.
Guide plate
3
Push the adapter onto the end of the tap so
that the rubber seal forms a watertight
connection. Tighten the four fixing screws
and the adapter ring plate.
4
Pull the connector latch plate down, push
the supply hose onto the adapter, and
release the connector latch plate. Make
sure the adapter locks into place.
NOTE
• After connecting the supply hose to the water
tap, turn on the water tap to flush out foreign
substances (dirt, sand, sawdust, and etc.) in
the water lines. Let the water drain into a
bucket, and check the water temperature.
Latch plate
Connecting Hose to Two Washing
Machines
1
Connect the water supply hose connector to
the water supply hose of the front-loading
washing machine. Open the accessory
package for pedestal washing machine
installation.
Water supply hose connector
Press board
2
Connect the water supply hose of pedestal
washing machine to the water supply hose
connector, pedestal washing machine to be
installed.
Rubber packing
3
Connect the additionally provided water
supply hose of the front-loading washing
machine to the water supply hose connector
and water tap.
Water supply hose connector
EN
Rubber packing
15