Package Removal; Inspect The System Shipment; Rack Measurements For Anti-Move Brackets - Dell EMC DLm8500 Data Domain Physical Planning Manual

DLm8500 System Service Area and Removal

Package Removal

Inspect the system shipment

Disk Library for mainframe Physical Planning Guide for DLm8500
52
Figure 14 Rack measurements for anti-move brackets
If your system is secured by one or more of these anti-tip brackets, ensure that the
cabinet is in its final location before attaching them. Use the supplied bolts and
mounting holes to fasten the bracket to the cabinet and floor. (The additional brackets
help to prevent the cabinet from tipping while you service devices on slide rails.)
The 40U-C Cabinet Unpacking and Setup Guide provides information about installing the
anti-tip and anti-move brackets.
This section describes the procedures for inspecting and then unpacking the
DLm8500 cabinets.
This section describes about the inspection of system shipment.
About this task
Inspect the outer packaging for signs of possible shipping damage. If you notice visible
damage:
Procedure
1. Note the damage on the waybill.
2. Photograph the damage.
3. Notify the Dell EMC Traffic department and Customer Support management.
4. File a freight claim with the carrier.