Dimensions And Service Area; Shipping Dimensions And Clearance Requirements; Dlm8500 Cabinet Dimensions And Access Area - Dell EMC DLm8500 Data Domain Physical Planning Manual

DLm8500 System Service Area and Removal

Dimensions and service area

Shipping dimensions and clearance requirements

Disk Library for mainframe Physical Planning Guide for DLm8500
48
This section provides service area and dimensions information.
Because DLm cabinets ventilate through the rear, you must provide adequate
clearance to service and cool the system, as illustrated in the next diagram.
Figure 9 DLm8500 cabinet dimensions and access area
EMC
Width
Disk Library for mainframe
24.02 in.
cabinet
(61.0 cm)
Height
76.66 in.
(194.7 cm)
Depth
41.88 in.
(106.4 cm)
DLm8500 VTEC cabinets have the same dimensions. This section provides the
dimensions, clearances, and placement of the VTEC cabinets.
See Dell EMC PowerMax Family Site Planning Guide for dimensions, clearances, and
placement of the PowerMax cabinets. Data Domain Hardware Overview and Installation
Guide provides corresponding Data Domain information.
Note: Read the entire procedure before unpacking.
Ensure that your doorways and elevators are adequately wide and tall enough to
accommodate the shipping pallet and cabinet as shown in the following figure:
Top access
18.0 in.
(45.7 cm)
EMC
Disk Library for mainframe
cabinet
Rear access
42.00 in.
(106.7 cm)
Front access
42.00 in.
(106.7 cm)
GEN-001156