Package Removal; Rack Measurements For Anti-Tip Brackets; Rack Measurements For Anti-Move Brackets - Dell EMC DLm8500 Data Domain Physical Planning Manual

Disk library for mainframe

Hide thumbs Also See for DLm8500 Data Domain:

Table of Contents

DLm8500 System Service Area and Removal

Package Removal

Disk Library for mainframe 5.0 Physical Planning Guide for DLm8500

Figure 13 Rack measurements for anti-tip brackets

Anti-move bracket —Use this bracket to permanently fasten the unit to the floor.

Figure 14 Rack measurements for anti-move brackets

If your system will be secured by one or more of these anti-tip brackets, ensure that

the cabinet is in its final location before attaching them. Use the supplied bolts and

mounting holes to fasten the bracket to the cabinet and floor. (The additional brackets

help to prevent the cabinet from tipping while you service devices on slide rails.)

The 40U-C Cabinet Unpacking and Setup Guide provides information about installing the

anti-tip and anti-move brackets.

This section describes the procedures for inspecting and then unpacking the

DLm8500 cabinets.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the DLm8500 Data Domain and is the answer not in the manual?

Dlm8500 vmax