System Placement; Dlm8500 Configuration Floor Cutouts; Unloading The Pallet - Dell EMC DLm8500 Data Domain Physical Planning Manual

DLm8500 System Service Area and Removal

System placement

DLm8500 configuration floor cutouts

Disk Library for mainframe Physical Planning Guide for DLm8500
50
Figure 11 Unloading the pallet
This section provides an overview of system placement.
You can install a DLm system on a solid floor or a raised floor.
Although not required, the raised floor environment is preferred.
This section provides information about DLm8500 floor cutouts configuration.
DLm8500 supports a maximum of two DD6300, DD6800, DD9300, or DD9800
systems or up to two PowerMax systems. The following figure illustrates the
configuration and the recommended floor tile cutouts for the DLm8500 configuration.
The figures assume that the floor tiles are 24 x 24 in. (61 x 61 cm).