System Placement; Dlm8500 Configuration Floor Cutouts; Unloading The Pallet - Dell EMC DLm8500 Data Domain Physical Planning Manual

Disk library for mainframe

Hide thumbs Also See for DLm8500 Data Domain:

Table of Contents

DLm8500 System Service Area and Removal

System placement

Disk Library for mainframe 5.0 Physical Planning Guide for DLm8500

Figure 11 Unloading the pallet

You can install a DLm system on a solid floor or a raised floor.

Although not required, the raised floor environment is preferred.

DLm8500 supports a maximum of two DD6300, DD6800, DD9300, or DD9800

systems or up to two VMAX systems. The following figure illustrates the configuration

and the recommended floor tile cutouts for the DLm8500 configuration. The

illustrations assume that the floor tiles are 24 x 24 in. (61 x 61 cm).

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the DLm8500 Data Domain and is the answer not in the manual?

Dlm8500 vmax