CHAPTER 25 • CGM Alerts and Errors
25.2 Second Startup Calibration Alert
Screen
What will I see on the screen?
216
Explanation
What does it mean?
How will the System notify me?
Will the System re-notify me?
How should I respond?
The System needs an additional BG value to complete startup
calibration. This will only appear if you did not enter a sensor code.
1 vibration, then vibration/beep every 5 minutes until confirmed.
Yes, every 15 minutes until second calibration is entered.
Tap
and enter a BG value to calibrate the System and start
OK
your CGM session.