Startup Calibration Alerts - Tandem t:slim X2 User Manual

25.1 Startup Calibration Alert
Screen
What will I see on the screen?
Explanation
What does it mean?
How will the System notify me?
Will the System re-notify me?
How should I respond?
CHAPTER 25 • CGM Alerts and Errors
2-hour CGM startup period is complete. This will only appear if you
did not enter a sensor code.
1 vibration, then vibration/beep every 5 minutes until confirmed.
Yes, every 15 minutes until you calibrate.
Tap and enter 2 separate BG values to calibrate the system
OK
and start your CGM session.
215