Supplemental Information
Connect Mode
Connect Mode defines how the Device Server makes a connection, and how it reacts to
incoming connections over the network. Use the following table to select Connect Mode
options:
Option
Incoming (network) Connection
Never accept incoming
Accept incoming with DTR*
Accept unconditional
Response
Nothing (quiet)
Character response (C=conn,
D=disconn, N=unreachable)
Startup (on serial connection)
No active startup
With any character
With active DTR*
With CR (0x0D) only
Manual connection
Autostart
Datagram Type
Directed UDP
Modem Mode
With Echo
Without Echo
*DTR is an output signal on a DTE serial port. The DTE devices are the CoBox Micro, CoBox Mini, and
CoBox Mini100. On DTE devices, use DCD (input) instead of DTR.
Note: See Binary to Hexadecimal Conversion on page E-18 for more
information on converting binary values to hexadecimal format.
Table E-9: Connect Mode Options
Bit
7
6
5
4
3
0
0
0
0
1
0
1
1
0
0
1
0
0
0
0
0
0
1
1
0
0
0
Setup Records
2
1
0
0
0
0
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
0
0
1
1
0
1
1
0
E-11
Need help?
Do you have a question about the CoBox-Micro and is the answer not in the manual?