Lantronix CoBox-Micro User Manual page 7

1: Introduction
This manual provides the information needed to use the three Lantronix Embedded
Integration Kits in conjunction with three of our embedded Universal Device Servers. It
also describes (Chapter 5) the UDS-10B Device Server (which does not have an integration
kit).
The next four chapters are devoted to embedded Device Servers. The chapters and
appendixes that follow them are devoted to those products in relationship to the Embedded
Integration Kit.
Embedded Integration Kits
The three Lantronix Embedded Integration Kits (Mini-Kit, Mini100-Kit, Micro-Kit)
provide an elegantly simple method of evaluating our CoBox-Mini, CoBox-Mini100, and
CoBox-Micro embedded Device Servers. These kits allow software engineers to test our
Device Servers with their products prior to the hardware development of those products.
Each kit contains an embedded Device Server, board carrier unit, and all the connectors and
data needed to interface our product with your serial device. The Embedded Integration
Kits include the following:
!
An embedded Device Server: CoBox Micro, CoBox Mini, or CoBox Mini100
!
Board carrier unit: with Ethernet (10BaseT RJ45) and serial (DB-9) interfaces
!
Power supply
!
10-foot unshielded twisted pair cable
!
10-foot serial cable
! DB-9 to DB-25 converter
!
User's Guide (printed and on CD): installation, firmware configurations, application
examples, technical tips
! Software CD: latest Redirector software, run-time and HTTP codes, Winsock
examples, and PDF version of the User's Guide.
1-1