Lantronix CoBox-Micro User Manual page 100

Setup Records
Disconnect Mode
In Disconnect Mode, DTR drop either drops the connection or is ignored. Use the following
table to select Disconnect Mode Options:
Option
Disconnect with DTR drop
Ignore DTR
Telnet mode and terminal type setup
Channel (port) password
*DTR is an output signal on a DTE serial port. The DTE devices are the CoBox Micro, CoBox Mini, and
CoBox Mini100. On DTE devices, use DCD (input) instead of DTR.
Note:
See Binary to Hexadecimal Conversion on page E-18 for more
information on converting binary values to hexadecimal format.
Flush Mode (Buffer Flushing)
Using this parameter, you can control line handling and network buffers with connection
startup and disconnect. You can also select between two different packing algorithms. Use
the following table to select Flush Mode options:
Function
Input Buffer (Serial to Network)
Clear active connection (from serial)
Clear passive connection (from network)
Clear at disconnect
Output Buffer (Network to Serial)
Clear active connection (from network)
Clear passive connection (from serial)
Clear at disconnect
Alternate Packing Algorithm
Enable
E-12
Table E-10: Disconnect Mode Options
Table E-11: Flush Mode Options
Supplemental Information
Bit 7 6 5 4
1
0
1
1
Bit 7 6 5 4
1
1
1
1
3 2 1 0
3 2 1 0
1
1
1