Network Configuration Using A Telnet Connection; Serial Configuration - Lantronix CoBox-Micro User Manual

Network Configuration Using a Telnet Connection

Configuration
3
Use the menu to navigate to subpages where you can configure server settings.
Figure 7-2: Web Manager Interface
Menu
Network Configuration Using a Telnet
Connection
To configure the Device Server over the network, establish a Telnet connection to port
9999. From the Windows Start menu, click Run and type the following command, where
x.x.x.x is the IP address and 9999 is the Device Server's fixed network configuration port
number.
Figure 7-3: Network Login Using Telnet
telnet x.x.x.x 9999
Note:
Be sure to include a space between the IP address and 9999.

Serial Configuration

For local configuration, a terminal or a PC running a terminal emulation program can be
connected to the Device Server's serial port. The terminal (or emulation) should be
configured for 9600 baud, 8-bit, no parity, 1 stop bit, and no flow control.
7-2