Table of Contents
Advertisement
To Configure the Terminal Network Connection
Using Web Manager
To configure the Terminal on Network, click Terminal on the menu and select Network ->
Configuration.
Using the CLI
To enter the Terminal Network command level: enable -> config -> terminal
network
Using XML
Include in your file:
To Configure the Terminal Line Connection
Note:
The following section describes the steps to view and configure Terminal 1
settings; these steps apply to other terminal instances of the device.
Using Web Manager
To configure a particular Terminal Line, click Terminal on the menu and select Line 1 ->
Configuration.
Using the CLI
To enter the Terminal Line command level: enable -> config -> terminal 1
Using XML
Include in your file:
Host Configuration
Host Settings
Name
Protocol
EDS-MD® Medical Device Server User Guide
<configgroup name="terminal" instance="network">
<configgroup name="terminal" instance="1">
Table 8-2 Host Configuration
Description
Enter a name for the host. This name appears on the Login Connect Menu. To
leave a host out of the menu, leave this field blank.
Select the protocol to use to connect to the host. Choices are:
Telnet
SSH
Note:
SSH keys must be loaded or created on the SSH page for the SSH
protocol to work.
8: Terminal and Host Settings
59
Advertisement
Table of Contents
