Rename Or Disconnect A Paired Device; About Serial And Usb Communications; About Near Field Communication (Nfc) - Honeywell Dolphin CT50 User Manual

Chapter 6 — Configure the Computer

Rename or Disconnect a Paired Device

About Serial and USB Communications

About Near Field Communication (NFC)

70
You can rename or disconnect a paired Bluetooth device from the
Settings app.
1 Open the Settings app and tap Bluetooth.
2 Tap the Settings icon
3 To rename the device, type the new name, and then tap OK.
You can use these accessories to transmit data to and receive data from
another device through serial or USB communications:
• vehicle dock
• HomeBase
• Ehternet HomeBase
• USB snap-on adapter
• RS-232 DEX adapter
For information on these accessories, contact your local sales
representative.
If you have a problem with your PC recognizing the USB device, you can
download and install the Honeywell-aidc-usb-driver. The driver is part of
the Honeywell_MobilitySDK_Android software .zip file. The SDK is
available from www.honeywellaidc.com
Computers > Handheld Mobile Computer > Dolphin CT50 >
Software tab.
NFC technology provides the ability for short-range, wireless data
transfer between the CT50 and NFC tags or other NFC enabled devices
placed in close proximity to the back of the computer. NFC equipped
CT50 models support the following modes of operation:
• NFC tag reader/writer mode: The computer reads and/or writes
digital information from or to an NFC tag.
• Peer-to-Peer (P2P) mode: The computer uses Android Beam and/or
Bluetooth technology to transfer screen content (such as a picture,
contact information, Web page URL, or file) between NFC enabled
devices.
next to the paired device.
> Products > Mobile
Dolphin CT50 Mobile Computer User Guide