Ascii Communication With Controller; General; Commands Overview - MICRO-EPSILON colorCONTROL ACS7000 Instruction Manual

Appendix | ASCII Communication with Controller
colorCONTROL ACS7000
A 3

ASCII Communication with Controller

A 3.1

General

All commands, inputs and error messages are in English. A command always consists of
the command name and zero or more parameters, which are separated by spaces and
are completed with LF. If spaces are used in parameters, the parameters must be placed
in quotation marks (e.g. „password with spaces").
Example:
Input:
MEASMODE:
COLORDETECTION:
The currently set parameter value is returned, if a command is activated without param-
eters.
The output format is:
<Command name> <Parameter1> [<Parameter2> [...]]
Example:
Input:
Reply of system:
In this case, optional parameters are returned only where necessary. For example,
OUTCOLOR_ETH, will return enabled outputs only.
After processing a command, the system always returns a line break and a command
prompt. In the event of an error, an error message starting with "Exx" will appear before
the prompt, where xx represents a unique error number.
A 3.2

Commands Overview

Group Chapter
General
User level
Setup controller
->MEASMODE COLORDETECTION
is the command name to select the measurement mode.
is the parameter for the command MEASMODE
->OUTCOLOR_ETH
OUTCOLOR_ETH LAB LCH
Command
HELP
GETINFO
ECHO
PRINT
LOGIN
LOGOUT
GETUSERLEVEL
STDUSER
PASSWD
OBSERVER
LOSRC
LEDCTRL
LEDKW, LEDGR,
LEDWW, LEDUV
AUTOLEDADJ
DARKCORR
LIGHTCORR
Short info
Help
Controller information
Reply type
Overview parameters
Change of user level
Change to user level
Request user level
Set standard user
Change password
Viewing angle (standard observer)
Light source mode (light type)
Control of the light source
Intensity of a LED quadrant
Starting a unique automatic adjust-
ment of an internal LED
Start dark reference
Start light source reference
Page 62