PHASE 7 | Power Pole Retrofit
Step 1
Mount the adapter bracket to power pole using two
machine screws and two self tappers.
Step 2
Insert Power Pole with adapter bracket into the slot
opening in the side of the vertical post. (Remove
the top cap and the side trim from the vertical post
for post installation.)
ILINE INSTALLATION GUIDE | 46
1
4
5
Step 3
Anchor down the post with two screws into the
vertical post.
Step 4
Adjust glide in the bottom plate to the floor level.
Step 5
Provide anchoring to the sealing using the sealing
trim.
ILINE 90°/180° (4-WAY)
3
2
amqsolutions.com