AMQ ILINE Series Installation Manual page 13

PHASE 3 | Post, Beam Plate & Feet Assembly (cont .)
Step 1
Insert side covers into all exposed openings of
each vertical posts.
Step 3
Take two data adapters/face plates and snap
them onto each end of the underside of the beam
assembly. Snap on data face plates.
ILINE INSTALLATION GUIDE | 13
Step 2
Place top caps on all vertical posts.
Step 4
Insert the bottom beam plates between each data
adapter on the underside of the beam assembly.
Step 5
Repeat Steps 1-4 for all beam assemblies.
ILINE 180° (2-WAY)
amqsolutions.com