Entering Electric Base Feed - AMQ ILINE Series Installation Manual

PHASE 4 | Entering Electric Base Feed
7/16" Spanner
Use 1/4"-20 hex nut to tight down
posts on the footer-assemblies
Step 1
Take the exposed end of the power entry and feed
through the center vertical post.
ILINE INSTALLATION GUIDE | 26
2
1
Step 2
Plug the power entry plug to the junction block.
NOTE:
Depending on the floor plan, you may access
the base feed through any of the posts in the
assembly.
ILINE 120° (3-WAY)
amqsolutions.com