Table of Contents
Advertisement
PHASE 7 | Extending the Configuration
Step 1
Selecting the post that will accommodate the
extension, replace the end foot plate (DRE) with a
center foot.
Step 2
Open the top cap, then insert the new beam
assembly.
ILINE INSTALLATION GUIDE | 29
2
4
DRE
Step 3
Feed the jumper through the beam canal and
into the vertical post opening into the next beam
assembly.
Step 4
Connect the jumper to each junction block.
Re-attach the top cover onto the vertical post.
ILINE 120° (3-WAY)
3
1
DRC
amqsolutions.com
Advertisement
Table of Contents
