Installing Caps & Covers - Post Sleeve - AMQ ILINE Series Installation Manual

PHASE 6 | Installing Caps & Covers — Post Sleeve ILINE 120° (3-WAY)
Step 1
Detach the pre-cut portion for the base feed
access and line up with post.
Step 2
Align the Post Sleeve* on both sides and
apply pressure until pieces snap into place.
1
2
Step 3
Installed Post Sleeve.
NOTE:
After installing electrical, level for
best aesthetic appearance.
Attached Post Sleeve
3
amqsolutions.com
ILINE INSTALLATION GUIDE | 28