Remove the M4X10 screw under the monitor holder to release the VESA plate. Attach the VESA plate to the monitor and resecure to monitor holder with M4X10 the M4X10 screw. amqsolutions.com ACTIV DT RISER INSTALLATION GUIDE | 3...
M6X12 Step 2 Insert Keyboard Tray Assembly into the Keyboard Bracket until the pin releases and keyboard tray is firmly secured. Installation of your DT Riser is complete. amqsolutions.com ACTIV DT RISER INSTALLATION GUIDE | 4...
Page 5
Note: Single monitor holder is re-used for the dual monitor mount assembly. M6X12 Step 3 Use the M6X10 hand screws (x4) to fasten monitor holder to dual monitor mount through the horizontal cut-outs in the mount. M6X10 hand screw amqsolutions.com ACTIV DT RISER INSTALLATION GUIDE | 5...
Page 6
Step 3 Use a 13mm wrench to adjust the M8 screw on the VESA mount for appropriate tension — clockwise to increase tension (for larger monitors) and counterclockwise to decrease tension (smaller monitors). amqsolutions.com ACTIV DT RISER INSTALLATION GUIDE | 6...